DCS Automation Engineer with Pharma Experience (ABB, Siemens, DeltaV, Sattline)
Denne stilling er desværre ikke længere ledig.
Se alle ledige stillinger
Storkøbenhavn
Automation Engineer with Experience in DCS programming
Job-Link is looking for a highly skilled professional to join our client's team for an exciting and rewarding endeavor.
Your role will be pivotal in shaping, developing, executing, and validating automation systems. This remarkable project is based in in the Zealand area of Denmark, only 1 hour from Copenhagen, offering you the incredible opportunity to work on-site and contribute to groundbreaking advancements in the pharmaceutical industry.
About the job:
The right candidate has the following skills:
It will be considered an advantage if you also know about the following:
We invite you to apply and join our client’s highly professional team.
We can also accept consultants through their own company.
We are looking forward to receiving your CV.
References, although not mandatory at this stage, are always welcomed, so if you add them, then please do so in a seperate file.
For further information about the vacancy please contact us
Job-Link is looking for a highly skilled professional to join our client's team for an exciting and rewarding endeavor.
Your role will be pivotal in shaping, developing, executing, and validating automation systems. This remarkable project is based in in the Zealand area of Denmark, only 1 hour from Copenhagen, offering you the incredible opportunity to work on-site and contribute to groundbreaking advancements in the pharmaceutical industry.
About the job:
- We are offering contracts spanning about 1-3 years with the potential for extensions. This provides you the opportunity to make a lasting impact and forge a long-term commitment to the project.
- The project site is located in Zealand, Denmark and you will be expected to work on-site, with role-dependent flexibility.
The right candidate has the following skills:
- Pharmaceutical process knowledge
- Minimum 2-4 years of experience in DCS programming - Preferably: ABB 800xA, Siemens, Sattline.
- Minimum 2-4 years of experience in Batch Management
- Experience working under Good Manufacturing Practice, GMP
(in special cases, we might consider candidates who do not have GMP, but have related experience and knowledge) - Competent in Good Document Practice, GDocP
- 2-4 years of experience in Testing FAT & SAT.
- 2-4 years of experience in Commissioning.
- 2-4 years of experience in Documentation work: Protocols, Test plans, Test references.
- Familiar with Qualification and Validation activities
It will be considered an advantage if you also know about the following:
- S-88 knowledge
- Understanding of batch production and related requirements in the pharmaceutical industry
- 3-5 years of experience in Design (Functions Specification)
- Familiar with PCdeviceLib and PCequipmentLib from ABB 800xA.
We invite you to apply and join our client’s highly professional team.
We can also accept consultants through their own company.
We are looking forward to receiving your CV.
References, although not mandatory at this stage, are always welcomed, so if you add them, then please do so in a seperate file.
For further information about the vacancy please contact us
Information og data
Denne ledige stilling har jobtypen "Maskintekniker", og befinder sig i kategorien "Industri, håndværk og teknik".
Arbejdsstedet er beliggende i Storkøbenhavn
Jobbet er oprettet på vores service den 16.1.2025, men kan have været deaktiveret og genaktiveret igen.
- Maskintekniker
- Storkøbenhavn
Lignende jobs
-
Kantpresse-operatør med erfaring søges
Få mere info- Maskintekniker
- Storkøbenhavn
-
Sprinkler servicetekniker
Er du skarp til service og eftersyn af sprinkleranlæg, og trives du i en hverdag med stor frihed, faglige udfordringer og et stærkt team i ryggen? Så er du måske vores nye sprinklertekniker. V..Få mere info- Maskintekniker
- Brøndby
-
Brandtekniker til CPH lufthavn
Vil du være med til at skabe tryghed, sikkerhed og stabil drift i Danmarks største lufthavn? Hos [xxxxx] søger vi lige nu en erfaren og kvalitetsbevidst brandtekniker til vores stærk..Få mere info- Maskintekniker
- Albertslund
-
Maskinmester til Amagerværket
Hos [xxxxx] bliver du en del af Danmarks største forsyningsselskab. Vi ejer og driver Amagerværket, der leverer fjernvarme til Københavns borgere og elektricitet til det nordeuropæiske el-marked. M..Få mere info- Maskintekniker
- København S
Statistik over udbudte jobs som maskinteknikere i Storkøbenhavn
Herunder ser du udviklingen i udbudte maskintekniker i Storkøbenhavn over tid. Bemærk at jobs der ikke har en bestemt geografi ikke er medtaget i tabellen. I den første kolonne ser du datoen. I den næste kolonne ser du det samlede antal maskinteknikere i Storkøbenhavn.
| Dato | Alle jobs som maskinteknikere |
|---|---|
| 16. marts 2026 | 40 |
| 15. marts 2026 | 42 |
| 14. marts 2026 | 42 |
| 13. marts 2026 | 42 |
| 12. marts 2026 | 43 |
| 11. marts 2026 | 46 |
| 10. marts 2026 | 47 |
| 9. marts 2026 | 46 |
| 8. marts 2026 | 48 |
| 7. marts 2026 | 47 |
| 6. marts 2026 | 47 |
| 5. marts 2026 | 41 |
| 4. marts 2026 | 43 |
| 3. marts 2026 | 43 |
| 2. marts 2026 | 42 |
| 1. marts 2026 | 40 |
| 28. februar 2026 | 45 |
| 27. februar 2026 | 46 |
| 26. februar 2026 | 44 |
| 25. februar 2026 | 45 |
| 24. februar 2026 | 41 |
| 23. februar 2026 | 41 |
| 22. februar 2026 | 48 |
| 21. februar 2026 | 48 |
| 20. februar 2026 | 48 |
| 19. februar 2026 | 44 |
| 18. februar 2026 | 45 |
| 17. februar 2026 | 46 |
| 16. februar 2026 | 47 |
| 15. februar 2026 | 48 |
| 14. februar 2026 | 48 |